How to control weeds in your lawn

There are a lot of people that don’t have a need to trim grass, but they do have a bunch of weeds growing all over their yard and along fences that they would like removed. One of the best uses of a grass trimmer is to eat weeds, and for many people, this weedeating is the primary task of their trimmer.

Low quality grass trimmers are not very good weedeater trimmers, especially if the weeds are in tighter spots, like along fences or walls. A good weedeater trimmer needs to have a lot of mobility and power. It must allow you the flexibility and ease to put the trimmer cord in tighter spots, like at the very base of a fence or wall. It must also allow you to cut thought the larger bundled weeds without having to keep changing the cord due to it breaking or grinding down to nothing.

Many people buy the lower-end grass trimmers that they find on sale in their local department stores thinking that they won’t have any problems cutting down that dense weed growth along their fences and walls. Unfortunately, they’re usually very surprised to find that the trimmer cords that come with the trimmer are so fragile that they need constant replacement after 10 minutes of use. After going through 5 or 6 cords to complete a lousy trim job, many don’t look forward to getting it out again.

How can you control weed in your lawn

Weeds can be loosely defined as plants that are growing in the wrong place. Many weeds can be easily controlled and do little more than cause a nuisance to a gardener or landholder.

Here are some methods for controlling weeds:

Use of a Stirrup Hoe – The best method for controlling weeds is to use a stirrup hoe to cultivate the ground at least once a week. It doesn’t take much time to go out and work your hoe down each row, and by doing this, no weeds can grow because seedlings are uprooted or cut off before they have a chance.

Use of a Pitchfork – By using a pitchfork in a new and/or large bed with little or no existing plants, you will be able to get most of the roots of long rooted weeds.

Vinegar or Boiling Water – If you spot a weed growing in the sidewalk cracks of your sidewalk or in your driveway, try pouring boiling water or vinegar over them.

Mulch – Use lots of mulch. As long as mulch is applied thick enough to keep sunlight from reaching the soil, it will keep new weeds from sprouting.

Hand Picking – The best way to control weed is to hand pick them. Try to pick them before they flower to prevent them from going to seed and seeding themselves all over the yard. Also, be sure to get all the roots; as the weed will more than likely be back in a couple of weeks.

Choosing the best grass trimmers

Weed Eaters are common both in the Landscape Industry and in the home environment and should be utilized within manufacturer’s recommendations. All weed eaters basically have the same design, but come with a variety of power sources. Not only that, but they also come in different power ranges, sizes and prices.

How to choose an electric crepe maker in 2018

When it comes to making crepes, I have always failed miserably. I have never been able to make crepe that aren’t either totally flat or burnt on the outside and doughy on the inside. I’m not sure if I’m the only one out there that is a crepe making dummie or not but I’ve found an easy pancake and crepe recipe that actually turns out perfect every time. I have also figured it out that to make a good french crepe you will need an electric crepe maker. This appliance helped me tremendously in making both pancakes and crepes easily.

Choosing the best electric crepe makers in 2018

You can find lots of electric crepe makers out in the market and each model has features for a specific function. Electric crepe-makers range from 500 to 1500 watts. These machines have a non-stick plate that allows easier cooking. They also have automatic thermostats to regulate the heat so that the crepe is cooked just right to your desire. If you are looking for the best electric crepe makers in UK, then Breville VTP130 Traditional Crepe Maker will be you best option. It has non stick coated aluminum plate of diameter 12 inches and has five different temperature settings.

Electric crepe maker 2018

You need to ask yourself what features would you like in your electric crepe maker. Of course, budget is always an issue but there are many inexpensive electric crepe makers out in the market. Do your research. What were the things you needed to improve on in your last crepe maker? Check out your local appliance stores but don’t forget to search over the internet as well. Some online shops sell packages that already include recipe books and other freebies.

Electric crepe makers are very user-friendly. You’ll find that you’ll be making crepes you see only in cafes in no time. These are very simple devices that any novice can operate. On top of that, they have non-stick surfaces and automatic thermostats. This makes your crepes easier to cook as the electric crepe maker regulates the heat and temperature of the surface to your liking. It will also evenly spread the heat over the plate. You may remove the crepe easily once it’s done. After all, it has a non-stick surface. This way, your breakfast will be ready in no time. Here are top electric crepe makers of 2018:

Tibos Cromed Electric Crepe Maker

The Tibos Cromed Electric Crepe Maker has great advantages to it. The plate heats up quickly so it’s a time-saver. Aside from that, the plate has a smooth and non-sticky surface that can spread the batter evenly across the surface. Furthermore, this crepe maker consumes less power compared to other models while still performing at an excellent level. It’s very simple and easy-to-use and it comes with an instruction manual and a recipe book. Since it’s not a low-end crepe maker, its price may be higher than other models you’ve looked at, but you’re also getting a top quality product that suits your every need.

The Tibos Cromed Electric Crepe Maker can easily make crepes. With it non-stick, quick-heat surface, the batter can be spread in a mere 4 seconds while your crepes will be ready in just 30 seconds. You can explore your favorite recipes such as French buckwheat galettes and sweet crepes, Russian pancakes, Mexican tortillas, American pancakes, Italian crespelles, Hungarian and Austrian palatschinken, Tunisian bricks, Indian chapatis, Moroccan beghrirs, Asian spring rolls, Vietnamese banh xeo, Japanese okonomiyaki, and English pikelets.. You can make crepes quickly with less power consumed. It’s that easy. Aside from crepes, this machine also allows you to make your favorite pancakes, gas house eggs, and French toast.

This electric crepe maker comes in at 15.375″ diameter x 5″H and weighs 10 pounds. It has a UL approved, 110 volts, 1300 watts, 12 amps, 5′ power cord, and has a 1-year manufacturer’s warranty. Check it out in your local retail shops or buy it online and get additional freebies with each purchase.

Unclogging A Toilet With The Best Toilet Plunger – 2018 Guide

There could be nothing worse than coming home from a long day to a blocked toilet. Learning how to unclog a toilet without having to call a plumber (or 24 hour plumber if it’s the middle of the night) will save you both time and money. The best method to unclog a toilet will depend on how badly it has clogged. For minor problems such as those caused by too much toilet paper (often referred to as “soft” clogs) you may be able to simply wait the problem out. With most clogs, water will be trapped in the bowl and the simple force of gravity, combined with the loosening action of water, may be enough to dislodge the blockage. But you may have to wait an hour or so for the water to do its work.

To move things along a little faster consider adding a few generous squirts of dish soap (biodegradable if possible!) into the bowl of your toilet. If you let this sit for a while and flush with some hot water, it may dislodge and unclog your toilet. The properties of the dish soap act as a lubricant that can help the clog to detach from the sides of pipes. But remember not to flush if the water in the bowl is close to the rim. The bowl is designed to hold one entire tank of water, but typically not much more than this.

If you are in a hurry, or have a stubborn clog on your hands, then a good toilet plunger should do the trick. It is important that you create a solid seal over the entrance to the trap way in order to create the necessary suction and pressure to dislodge the toilet clog. Ensure there is some water in the pipes as water does not compress as much as air when placed under pressure. So if you plunge against water, you’ll be creating more pressure per push. If you are using a standard sink plunger you may find that this slips around on the curved surface of the toilet bowl (they are designed for flat surfaces). Far better to use a specialized toilet plunger that does it job perfectly. For more on how you can choose the best toilet plunger in UK later in this article.

How to unclog toilet with a plunger

If you feel tempted to unfold a wire coat hanger to try to reach what is stuck and break it up a little, bear in mind that the bends in the toilet trap way will usually keep the clog out of reach. Remember also that the wire of the hanger may scratch the porcelain of the toilet bowl, so be careful. unclog toilet. If none of the above approaches work and you’ve still got a blocked toilet, do not despair. You can always use a toilet snake or toilet augur.

simple toilet plunger UKA toilet snake may look unfamiliar but they are very easy to use. Simply place the end of the flexible cable into the toilet bowl and begin unwinding. The cable will extend round the bends in your trap way dislodging any clogs as it goes. If you come to the point where you feel some resistance, you will need to rewind the cable back into the bowl and remove anything that comes up with it. Repeat this process until your toilet runs clear. Toilet augurs can easily be bought online and are specifically designed to unclog a toilet. Click here for more information on purchasing a 3-Feet Home Toilet Auger by Cobra.

The first step in how to unclog a toilet with a plunger is to plunge the toilet with the rubber flange pulled out to get a better seal. Stick the plunger in the bowl and use it to form a solid seal over the exit hole. Push the plunger down until it touches the drain and then pull up sharply, but not enough to break the suction. I would hope that the bathroom in question would have hand soap, but if it doesn’t, one commenter suggests grabbing a bottle of shampoo from the shower, squirting some in the toilet and letting it sit for as long as possible. Push in and out vigorously, keeping enough water in the bowl to cover the plunger.

Rod said that most people only focus on the downward push when plunging. Repeat this a couple of times. If still nothing has happened you will probably need to use a different method (or bail some of the water out and add more hot water/ soap). Keep towels handy to wipe up water that splashes out. But the pullback is just as important. Hopefully, when you release the suction on the drain the clog should be dislodged releasing the water. So you have no plunger and you’re panicking. Give a few good up and down strokes with the plunger and flush the toilet. If there’s no change, repeat Steps 4 and 5 until the water begins to drain. You tried the hot water trick and IT’S NOT WORKING.

If the water clears from the toilet, then you’ve successfully unclogged it. Carefully pour the hot water into the toilet bowl to dissolve the liquid or bar soap. Your composure is quickly going down the tubes…pardon the pun. Add some hot water and let it sit for a while. The soap should quickly begin to unclog the toilet drain by helping the clogged object start sliding down the pipes. Don’t worry, there is another trick that does not require a plunger, just some dish soap. Things should start moving around and breaking up in a half hour or so, but in more extreme cases, you should be prepared to let the soap do its thing overnight.

As a last resort, you can use a drain cleaner but bear in mind that cleaners can be very harsh on the pipes and are typically not very good for the environment. There are enzymes that you can purchase that will literally eat the materials that are stuck in your pipes.